800x1600 tiles, also called 32x64 inch tiles or 2.5x5 feet tiles, are large-format vitrified tiles used on both walls and floors. The size sits between regular 2x4 tiles and full slab sizes like 1200x1800, so it gives a clean, large-format look without the handling problems of slabs. One 800x1600 tile covers about 13.77 sq. ft., and a box of two tiles covers 27.54 sq.ft. The range works for living rooms, bedrooms, foyers, hotel lobbies, showrooms, and feature walls. Browse 800x1600 designs in GVT, PGVT, Full Body, and Colour Body, in matte, glossy, sugar, and carving finishes.
The 1:2 ratio of the 800x1600 size makes it one of the most balanced large-format tiles. The tile is big enough to cut down grout lines and give a slab-like look, but small enough that most tile layers can fix it without special handling equipment. People mostly use this size for living room flooring, bedroom flooring, foyer walls and floors, lobby flooring, showroom flooring, and bookmatch feature walls.
For Indian homes where rooms are usually 12x14 feet to 16x20 feet, the 800x1600 size works well because fewer cuts are needed at the edges, and the visual scale matches the room. In smaller rooms below 10x10 feet, the size can look out of proportion, and 600x1200 is the better pick.
Buyers often search for the 800x1600 size in different units. The mm size is what the factory prints on the box. The inch and feet versions are what most contractors quote on-site. Here are the exact conversions.
| Unit | Single Tile Size | Area per Tile | Area per Box (2 tiles) |
| Millimetres (mm) | 800 x 1600 mm | 1.28 sq.m | 2.56 sq.m |
| Inches | 32 x 64 inch | 14.22 sq.ft | 27.54 sq.ft |
| Feet | 2.5 x 5 feet (approx 2.67 x 5.33) | 13.77 sq.ft (approx) | 27.54 sq.ft |
| Centimetres | 80 x 160 cm | 0.128 sq.m | 2.56 sq.m |
To work out how many tiles you need, divide your total area in sq.ft by 13.77, then add 10% for cutting wastage. For a 600 sq.ft living room, you need around 600 / 13.77 = 44 tiles, plus 10% extra, which works out to 48 tiles or 24 boxes.
800x1600 tiles come in four main vitrified body types. Each type has a different surface build and a different price point. Pick the body type based on where you plan to lay the tile and how much foot traffic it will get.
| Category | Water Absorption | Best Use | Price Range (Rs/sq.ft) |
| GVT | 0.05% | Indoor and outdoor floors, walls, and balcony | 60 to 110 |
| PGVT (Polished) | 0.05% | Living room walls, foyer walls, dry-area floors | 80 to 150 |
| Full Body | 0.05% | High-traffic commercial floors, edge groove work | 120 to 200 |
| Colour Body | 0.05% | High-end architectural projects, hotels | 150 to 250 |
Note: PGVT tiles in the 800x1600 size must not be used on wet-area floors or outdoor floors. The polished finish becomes slippery when wet. For wet zones, pick GVT or Full Body in a matte finish.
Prices above are indicative for the Indian market and vary by brand, design, and city. Morbi factory rates run lower than retail showroom rates by 20% to 30%.
The 800x1600 range comes in most surface finishes. The right finish depends on whether the tile goes on a wall or floor, and whether the area stays dry or gets wet.
| Finish | Surface Look | Where It Works | Slip Risk |
| Matte | Flat, no shine | Floors and walls, dry and wet areas | Low |
| Polished Glossy (PGVT) | Mirror-like shine | Walls and dry-area floors only | High when wet |
| Matte Carving | Matte with glossy veins | Walls and floors | Low |
| Sugar | Grainy sparkle on matte base | Walls, dry floors | Low |
| Glossy Carving | Polished surface with grooves | Wall cladding mostly | High when wet |
| Posh | Soft matte, near-zero shine | Living room walls and floors | Low |
| Polished Sugar | Sparkle with partial polish | Feature walls in dry zones | Medium |
Matte stays the safest bet for floor work across the house. Polished finishes look striking on living room walls and feature walls, but should never go on bathroom floors, kitchen floors, or outdoor surfaces.
Not every room suits a large-format tile. The 800x1600 size shines in open, mid-to-large spaces where the long edge of the tile can run along the room. Smaller rooms look cramped when the tile is bigger than the floor section it sits on.
Note: Avoid 800x1600 in bathrooms smaller than 5x7 feet, in narrow passages under 4 feet wide, and in kitchens with heavy cabinet work. The cuts needed at the edges waste material and break the look.
800x1600 tile prices in India run from Rs. 60 per sq ft for basic GVT designs to Rs. 250 per sq ft for Colour Body and bookmatch slab-look designs. The factory base price in Morbi runs 20% to 30% below retail showroom prices. Transport cost adds Rs. 5 to Rs. 12 per sq ft based on distance.
| Tile Quality Grade | Body Type | Price Range (Rs/sq.ft) |
| Standard | GVT matte | 60 to 90 |
| Mid | PGVT polished glossy | 90 to 140 |
| Higher Range | Full Body, matte carving | 140 to 200 |
| High-end | Colour Body, bookmatch designs | 200 to 250 |
Price varies by brand, finish, design complexity, and city. Carving and bookmatch tile designs cost more because of the extra processing. Plain marble looks and abstract designs sit on the lower end of the band.
The 800x1600 size is the in-between option between regular tiles and slab tiles. Here is how it stacks up against the next larger and smaller sizes.
| Size | Coverage per Tile | Pieces per Box | Best Use | Handling Difficulty |
| 600x1200 mm (2x4) | 7.75 sq.ft | 2 | Medium rooms, bathroom walls | Easy |
| 800x1200 mm (2.5x4) | 10.33 sq.ft | 2 | Living rooms, bedrooms | Easy |
| 800x1600 mm (32x64) | 13.77 sq.ft | 2 | Living rooms, foyers, lobbies | Medium |
| 1200x1800 mm (4x6) | 23.25 sq.ft | 1 | Large halls, slab work | Hard |
| 1200x2400 mm (4x8) | 31.00 sq.ft | 1 | Showrooms, commercial slabs | Hard |
The 800x1600 size avoids the handling risk of 1200x1800 and above. Slabs need two people and a frame to lift, often with chipping at the edges in transit. The 800x1600 can be carried by two regular tile layers without machinery and fits into most service lifts.
Pick the 800x1600 size when the room is at least 10x12 feet, the floor is going to be one continuous surface, and the budget allows for the larger format. Use this checklist before placing an order.
Explore 800x1600 tile designs in GVT, PGVT, Full Body, and Colour Body categories sourced from Morbi manufacturers across India. With Tilesfinders, compare matte, polished, sugar, carving, and bookmatch finishes at direct factory pricing with transparent rates. Browse by colour, surface finish, and tile look, and request design samples for shortlisted products before visiting a dealer.
Explore tiles available with trusted dealers near your location.
View Dealers Near You →Speak The Language
Nine terms that come up constantly when shopping for tiles in India. Tap any card to expand it.
A vitrified body with a printed and glazed surface layer. Water absorption is 0.05% under IS 15622. The glaze carries the design, whether stone-look, wood-look, plain colour or pattern. The most-used body type for Indian floors and walls.
GVT with a polished finish applied after firing. High-shine, mirror-like surface. Correct for walls and dry indoor floors only. Never on a bathroom, kitchen or outdoor floor, it has close to no grip when wet.
Colour and pattern run through the entire thickness of the tile, not just a printed layer. A chip or deep scratch doesn't expose a different-coloured base. The pick for high-traffic and commercial floors.
A step above full body: tighter colour consistency through the body and finer surface control. Used on higher-end floors and walls where budget isn't the limiting factor.
Higher water absorption than GVT under IS 13630, still fit for most indoor floors and walls. The lower-cost entry point in most sizes, with a narrower finish range, commonly matte only in large formats.
Water absorption of 12% to 16% under IS 13630. In India, ceramic is made only up to 300x600 mm, it doesn't exist in larger formats. Fit for dry, low-traffic floors and any wall.
A textured, anti-skid finish with raised surface relief. Common where grip matters: bathroom floors, outdoor areas, parking. Never "Glossy High Relief," that's a different, incorrect expansion.
All four edges machine-cut to exact size after firing. Allows a narrow 1.5mm to 2mm grout joint. Non-rectified tiles have natural edge variation and need a wider 3mm to 4mm joint.
The slip-resistance rating on a spec sheet, tested under the German DIN 51130 standard. R9 is the lowest common rating; R10 and R11 are typical for wet or outdoor areas. Ask for the number in writing.
A complete fitting guide covering base prep, adhesive mixing, alignment, and grouting for a strong, long-lasting floor.
Compare vitrified tile, marble, granite, wooden, and vinyl flooring to see what suits your home and budget best.
Pricing on this page is checked against current dealer listings and manufacturer spec sheets. Body type facts, water absorption figures and IS standard references are checked against BIS documentation, not copied from other websites. This page still won't catch a batch-specific spec, so confirm exact figures with your dealer before ordering.
After The Tiles Are Laid
Five habits that keep any GVT, PGVT or porcelain floor looking new for years, not just months.
Acidic or alkaline cleaners can dull the glaze over time. A mild, pH-neutral floor cleaner keeps the finish intact.
Steel wool or scouring pads can scratch a polished surface permanently. A soft mop or cloth is enough for daily cleaning.
Light foot traffic is fine after 24 to 48 hours. Hold off on moving heavy furniture back for a full 7 days.
Cement grout benefits from a sealant applied a few weeks after laying, to resist staining. Epoxy grout doesn't need this.
A door mat at every entry cuts down on grit that scratches matte finishes over a wet season.
800x1600 mm tiles measure 2.5 feet by 5 feet in approximate terms, or 2.67 feet by 5.33 feet when converted exactly. Each tile covers around 13.77 sq.ft. A standard box has two tiles and covers 27.54 sq.ft. This size is also called 32x64 inch tiles in the inch system.
One box of 800x1600 tiles contains two tiles. Total coverage per box is 27.54 sq. ft. or 2.56 sq m. The box weighs 35 to 40 kg, so two people are needed to lift it safely. Always order 10% extra boxes to allow for cutting wastage and breakage at the site.
800x1600 tile prices in India range from Rs. 60 per sq ft for basic GVT matte designs to Rs. 250 per sq ft for Colour Body and bookmatch designs. Mid-range PGVT tiles fall between Rs. 90 and Rs. 140 per sq.ft. Prices vary by brand, finish, design, and city. Factory rates in Morbi are 20% to 30% lower than retail.
32x64 inch tiles measure 800 mm by 1600 mm. In feet, this works out to about 2.67 feet by 5.33 feet, or 2.5 by 5 feet in the rounded form most contractors use. Each tile covers around 13.77 sq.ft. The 32x64 inch and 800x1600 mm names refer to the same tile, just in different units.
Yes, but only in matte finish and only in bathrooms larger than 5x7 feet. The size needs space to look right. Polished 800x1600 tiles must never go on bathroom floors because the surface becomes slippery when wet. For small bathrooms, 600x1200 or 600x600 matte tiles work better.
GVT means Glazed Vitrified Tile with a glazed but not polished surface. PGVT means Polished Glazed Vitrified Tile with a polished, high-shine surface. Both have 0.05% water absorption. GVT works on indoor and outdoor floors and walls. PGVT works on walls and dry-area floors only because the polished surface is slip-prone when wet.
Each 800x1600 tile covers 13.77 sq.ft. For a 500 sq. ft. room, divide 500 by 13.77 to get about 36.3 tiles. Round up to 37 tiles, then add 10% wastage to reach 41 tiles. That means 21 boxes of two tiles each. Buy from the same batch number to avoid shade differences.
Yes. Indian living rooms in flats and houses run 14x16 feet to 18x22 feet on average, which suits the 800x1600 size well. The larger format gives fewer grout lines, makes the room look bigger, and reads as a slab-grade finish at a lower cost than 1200x1800 slabs. Pick a matte or matte carving finish for safety and easy cleaning.
Real feedback from homeowners and contractors who found their perfect tiles
Found exactly the wood-look tiles I wanted for my living room. The dealer listed here had great stock and fair pricing. Saved me at least two weekends of running around showrooms.
Very detailed size and finish guide helped me choose anti-skid tiles for my bathroom. Wish I had found this site before my last renovation.
Good comparison between vitrified and ceramic options. Contacted a dealer directly through the listing and got a quote within the hour.
As a contractor, I use this to quickly show clients different tile sizes and finishes on-site. The photos are high quality and load fast even on mobile data.
Loved how easy it was to filter by size and color together. Ended up going with 600x1200 GVT tiles for my hall, exactly what I was picturing.
Solid resource for comparing tile finishes before visiting the showroom. Would like to see more price transparency, but overall a helpful first step.
The dealer directory saved me so much time. Called two showrooms directly from the site and had my order finalized within two days.
Great breakdown of PGVT vs GVT vs ceramic. I finally understood which tiles are meant for walls versus floors before making a costly mistake.
Used this while renovating my kitchen backsplash. The FAQ section answered most of my questions about grout and water resistance without needing to call anyone.
Best part is being able to browse by room type. Picked out balcony and parking tiles in the same session without jumping between different sites.
-1-b04da931-2f5e-436f-b9b0-b9f842c16f59.jpg "CR Camo Beige (800×1600)")
-1-5e472771-3af9-4396-9a52-120cff351be7.jpg "EL Agora Beige (800x1600)")
-1-568ae262-dfa9-4ab0-83ed-bb88c412fe5b.jpg "CR Camo Dove(800×1600)")
-1-50394048-d331-4df3-8521-eab6a28ed34e.jpg "CR Camo Grey(800x1600)")
-1-1d1e2287-bf03-4220-b328-3c198e691843.jpg "EL Agora Brown (800x1600)")
)-L-1-23323d7a-f59b-4e8e-9024-fc3e361d4cc0.jpg "Nor Gold(800x1600)")
