Best Ivory Ceramic and Vitrified Tiles in India: Budget to Premium Picks 2026

Ivory tiles in India span four distinct material categories and a price range from Rs. 40 to Rs. 220 per sq.ft. At the budget end, ivory glazed ceramic wall tiles provide a warm, near-white bathroom and kitchen wall at minimal cost. At the premium end, ivory Statuario marble-look GVT at 800x1600 mm delivers a near-seamless formal floor that reads as luxury Italian stone. Between these two endpoints, there are a large number of ivory tile options that are priced correctly for their application and a smaller number that are overpriced for what they deliver.

This guide covers the best ivory ceramic and vitrified tile picks across three budget tiers in 2026, with the quality checkpoints that separate a well-specified ivory tile from one that disappoints after installation.

Ivory Tile Material Categories in India

Before the tier-by-tier picks, understanding which material category is appropriate for which application prevents the most common ivory tile buying mistake: specifying a wall material for a floor, or an entry-tier product for a premium application. 

Caution: Ivory ceramic wall tiles (6 to 10% water absorption, PEI 1 to PEI 2) are sold in Indian showrooms alongside ivory GVT floor tiles and are sometimes purchased interchangeably. A wall tile on a floor wears through its glaze within 2 to 3 years of standard foot traffic and absorbs staining in wet areas. Always confirm the PEI rating and water absorption before purchasing any ivory tile for a floor application. 

If you're still deciding whether ivory tiles are the right choice for your home, our Ivory Tiles Guide explains everything from materials and finishes to room-wise applications before you make a purchase.

Budget Tier: Rs. 40 to Rs. 80 per sq.ft

The budget tier covers ivory tiles for bathroom and kitchen walls, puja room floors, compact bedrooms, and apartment balconies. At this price point, the material is predominantly glazed ceramic for walls and entry-level GVT for floors.

Idea 1: Glossy Ivory Ceramic Wall Tile, 300x450 mm

Glazed ceramic wall tile | 300x450 mm | Glossy | Rs. 40 to Rs. 65/sq.ft

The 300x450 mm glossy ivory ceramic wall tile is the most widely stocked ivory tile in the Indian market. Available from manufacturers across Gujarat, Rajasthan, and Andhra Pradesh, this tile covers the standard Indian bathroom and kitchen wall specification at the lowest accessible price. The glossy surface reflects light well in a compact bathroom, and the ivory tone adds warmth without the maintenance concerns of a floor application. For a standard Indian bathroom with 160 to 200 sq.ft of wall area, material cost at Rs. 40 to Rs. 65 per sq. ft is Rs. 6,400 to Rs. 13,000. Confirm the IS 13712:2006 compliance for the specific product before ordering.

Idea 2: Ivory Anti-Skid GVT Floor Tile, 300x300 mm

GVT | 300x300 mm | Anti-skid matte | PEI 4 | Rs. 60 to Rs. 80/sq.ft

The 300x300 mm ivory anti-skid GVT in matte finish is the entry floor specification for ivory bathroom floors, puja rooms, and compact apartment balconies. At 0.05% water absorption and PEI 4 with R10 to R11 anti-skid rating, this tile meets the correct technical specification for Indian wet-area floors. The 300x300 mm format gives more grout lines per square metre than larger formats, which increases wet-surface grip. At Rs. 60 to Rs. 80 per sq.ft, a 35 sq. ft bathroom floor costs Rs. 2,100 to Rs. 2,800 in material. Confirm COF 0.4 wet minimum in writing from the TDS before ordering bathroom floors.

Idea 3: Ivory Subway Ceramic Wall Tile, 75x300 mm

Glazed ceramic wall tile | 75x300 mm | Glossy | Rs. 50 to Rs. 75/sq.ft

The ivory subway ceramic tile at 75x300 mm is the most cost-accessible version of the rectangular subway format in the warm neutral colour range. Used as a kitchen backsplash, a bathroom feature wall, or an accent strip in a predominantly plain-tile bathroom, the subway format in ivory tone creates a warm, slightly vintage quality at the budget end of the Indian tile market. At Rs. 50 to Rs. 75 per sq. ft., a standard 18 sq. ft. kitchen backsplash costs Rs. 900 to Rs. 1,350 in material. Specify light cream or beige grout rather than white to prevent the grout from reading as a clinical grid against the warm ivory tile.

Idea 4: Ivory Plain GVT Floor, 600x600 mm Matte

GVT | 600x600 mm | Matte | PEI 4 | Rs. 70 to Rs. 80/sq.ft

The 600x600 mm plain ivory GVT in matte finish is the entry-level floor tile specification for bedrooms, puja rooms, and low-to-moderate traffic living rooms at the budget tier. At 0.05% water absorption and PEI 4, the technical specification is correct for all dry-area floors in Indian homes. At 2 to 3 face variations per batch, the tonal variation is limited but adequate for rooms under 150 sq.ft. For a 200 sq ft bedroom floor, material cost at Rs. 70 to Rs. 80 per sq ft is Rs. 14,000 to Rs. 16,000. The budget tier price for a full bedroom specification. 

Pro tip: At the budget tier, the distinction between a wall ceramic and a floor GVT in ivory is the most important check before purchasing. Both are available in similar sizes and similar price ranges. The floor GVT at 0.05% absorption and PEI 4 is specified correctly for any floor. The wall ceramic at 6 to 10% absorption and PEI 1 to PEI 2 is for walls only. Always check the TDS PEI rating before purchasing at this price range, as the product labelling is not always clear in budget-tier Indian tile displays. 

Mid Tier: Rs. 80 to Rs. 140 per sq.ft

The mid-tier is where the ivory tile range expands significantly in design quality, face variation count, format availability, and print resolution. At this price point, ivory GVT covers living rooms, dining rooms, bedrooms, and formal entrance areas with designs that convincingly replicate natural stone at room scale. 

Idea 5: Ivory Carrara Marble-Look GVT, 600x1200 mm Matte

GVT | 600x1200 mm | Matte | PEI 4 | Rs. 90 to Rs. 130/sq.ft

The 600x1200 mm ivory Carrara marble-look GVT in matte finish is the mid-tier primary living room and formal dining room specification. The Carrara print, with its ivory-white base and fine grey veining, replicates the most widely recognised Italian marble variety in a format that keeps grout lines to approximately 230 per 1,000 sq ft. At 4 to 6 face variations per batch, a 300 sq. ft. living room floor reads as genuinely random from a standing position. Under warm-white lighting at 2700K, the ivory base gains subtle warmth, and the veining reads as three-dimensional. The most widely specified mid-budget ivory tile in Indian urban apartments in 2026.

Idea 6: Ivory Statuario Marble-Look GVT, 600x1200 mm GHR

GVT | 600x1200 mm | GHR finish | PEI 4 | Rs. 100 to Rs. 140/sq.ft

The Statuario-look GVT in 600x1200 mm with GHR (Gentle High Relief) finish adds surface dimension to the ivory marble-look print, making the veining read as three-dimensional rather than flat-printed. GHR finish is most effective in formal living rooms and dining rooms where the tile is viewed under focused or accent lighting that catches the surface relief. At Rs. 100 to Rs. 140 per sq.ft with 4 to 6 face variations, this is the most visually convincing ivory marble-look tile in the mid-budget range for Indian formal rooms.

Idea 7: Ivory Stone-Look GVT, 600x600 mm Textured Matte

GVT | 600x600 mm | Textured matte | PEI 4 | Rs. 85 to Rs. 125/sq.ft

Ivory stone-look GVT at 600x600 mm in textured matte finish replicates the surface of natural ivory limestone or Jerusalem stone: a warm, near-white surface with a fine texture and subtle tonal variation. The textured matte finish adds a tactile quality absent from plain ivory GVT and reads closer to natural stone at close viewing distance. This design suits bedrooms, study rooms, and bathrooms where the near-white stone aesthetic is wanted without the formal marble-look veining. At 4 face variations and Rs. 85 to Rs. 125 per sq.ft, this is one of the most characterful ivory tiles in the mid-budget range.

Idea 8: Ivory Sugar-Finish GVT, 800x800 mm

GVT | 800x800 mm | Sugar finish | PEI 4 | Rs. 95 to Rs. 135/sq.ft

Ivory GVT at 800x800 mm in sugar finish is the mid-tier specification for a large-format bedroom or formal living room floor that wants the near-white tone without a marble or stone print. The sugar finish, with its micro-granular surface texture, gives the tile a subtle warmth and visual depth that a standard matte ivory does not have, and it reads closer to polished limestone or aged plaster than to a factory tile. At 800x800 mm, grout lines are approximately 185 per 1,000 sq. ft., producing a near-continuous floor at any room scale above 200 sq.ft.

Idea 9: Ivory Matte Ceramic Floor Tile, 600x600 mm (Mid-Budget Bedroom)

Glazed ceramic (floor-rated) | 600x600 mm | Matte | PEI 3 | Rs. 80 to Rs. 110/sq.ft

A mid-budget floor-rated ivory ceramic at 600x600 mm matte is a cost-effective specification for bedroom floors in Indian homes where a formal GVT specification is above budget. At PEI 3 and 3 to 5% water absorption, this tile is appropriate for a bedroom with low daily foot traffic and no moisture contact. For living rooms and kitchens, specify GVT at PEI 4 and 0.05% absorption instead. Confirm the IS 13712:2006 floor rating in the TDS. At Rs. 80 to Rs. 110 per sq.ft for a 200 sq.ft bedroom, the material cost is Rs. 16,000 to Rs. 22,000, which is slightly above the budget GVT tier but offers a wider colour depth range at this price point.

Note: At the mid tier, choosing between ivory ceramic floor tile at PEI 3 and ivory GVT at PEI 4 is a lifespan decision. A bedroom in a standard 3BHK Indian apartment sees low but daily foot traffic. PEI 3 ceramic wears through the glaze surface in 8 to 12 years under this use. PEI 4 GVT at the same price range lasts 12 to 20 years. If the renovation cycle is under 10 years, PEI 3 ceramic is acceptable. If the floor is expected to last through the next renovation, specify PEI 4 GVT.

Premium Tier: Rs. 140 to Rs. 220 per sq.ft

The premium tier covers large-format ivory GVT in 800x1600 mm and above, high face variation batches of 6 to 10 per batch, calibration tolerance at plus or minus 0.3 mm, and the most visually convincing marble-look and stone-look ivory prints available from Morbi manufacturers. These tiles are for formal living rooms, hotel lobbies, luxury apartment floors, and any project where the ivory floor is the primary design statement.

Idea 10: Ivory Statuario Marble-Look GVT, 800x1600 mm Matte

GVT | 800x1600 mm | Matte | PEI 4 | Rs. 155 to Rs. 215/sq.ft

The 800x1600 mm ivory Statuario marble-look GVT in matte finish is the benchmark premium ivory floor tile for Indian formal living rooms in 2026. In this format, a 300 sq. ft. living room uses approximately 22 tiles, producing a near-seamless floor with grout lines under 90 per 1,000 sq.ft. With 6 to 8 face variations and a calibration tolerance of plus or minus 0.3 mm, the floor reads as a continuous marble slab from any angle in the room. Under warm-white recessed lighting at 2700K, the ivory base gains the subtle golden quality that distinguishes a well-lit ivory floor from a plain white one.

Idea 11: Ivory Carrara Slab GVT, 1200x2400 mm Matte

GVT | 1200x2400 mm | Matte | PEI 4 | Rs. 190 to Rs. 220/sq.ft

The 1200x2400 mm ivory Carrara-look GVT is the slab format specification for hotel lobbies, flagship reception areas, and luxury villa living rooms above 500 sq.ft where near-zero grout lines are the design priority. Each tile covers 31 sq. ft., and a 500 sq. ft. floor uses only 16 tiles, with grout lines under 40 per 1,000 sq.ft. This format requires specialist slab-line production from Morbi manufacturers, vacuum suction lifters on site, plus or minus 0.3 mm substrate flatness, and a minimum 95% full-bed adhesive coverage. Lead time is 4 to 8 weeks from Morbi. The most expensive and most technically demanding ivory GVT specification.

Idea 12: Ivory Jerusalem Stone-Look GVT, 600x1200 mm Textured Matte

GVT | 600x1200 mm | Textured matte | PEI 4 | Rs. 145 to Rs. 185/sq.ft

Jerusalem stone-look GVT at 600x1200 mm in textured matte finish replicates the warm ivory-beige tones of Israeli or Jordanian limestone at the premium quality level. At 8 face variations and a rich multi-layer digital print, this design has the tonal complexity of genuine stone and reads as a premium material from any viewing distance. This sub-category sits at the border of the ivory and cream tone families and is the warmest and most stone-like of the ivory premium picks. Suited to formal dining rooms, master bedrooms, and large entrance foyers where natural stone character is the brief but GVT's maintenance-free performance is required.

Design principle: At the premium tier, format is more important than print sub-category. A plain ivory GVT at 800x1600 mm reads as more premium than an ivory marble-look tile at 600x600 mm because the large format and low grout line count produce the seamless quality that defines luxury flooring. The print can always be upgraded within a format. The format decision is the most visible quality signal in the finished floor. 

Need inspiration before selecting a finish? Explore 20+ Ivory Tile Ideas to see how ivory flooring transforms living rooms, bedrooms, kitchens, bathrooms, and balconies in modern Indian homes. 

Quality Checklist for Ivory Tiles Across All Tiers 

1. Water absorption confirmation. GVT: 0.05% or below per IS 15622:2006. Floor-rated ceramic: 3 to 6% per IS 13712:2006. Wall ceramic: 6 to 10%. The correct figure must be in the written TDS, not verbally from sales staff.
2. PEI rating. PEI 4 for living rooms, kitchens, dining rooms, foyers, and commercial floors. PEI 3 minimum for bedrooms. PEI 1 to PEI 2 is for wall use only. Any tile without a stated PEI should be treated as a wall tile.
3. Anti-skid COF rating for wet areas. COF 0.4 wet minimum for bathroom and kitchen floors. COF 0.5 wet and R11 for uncovered outdoor and balcony floors. Request the COF from the TDS, not verbally.
4. Face variation count for marble-look and stone-look ivory tiles. Minimum 4 for rooms above 150 sq.ft. 6 or more for rooms above 300 sq.ft. View 9 tiles in a 3x3 grid at 2 to 3 metres before approving the marble-look selection.
5. Calibration tolerance. For 600x600 mm and above: plus or minus 0.5 mm maximum at mid tier. Plus or minus 0.3 mm at the premium tier. At this tolerance or tighter, lippage on an ivory matte floor is not visible. Above this tolerance, edge steps between adjacent tiles catch raking light and read as a defect.
6. Tone consistency under the room's actual light. View the ivory tile under warm-white (2700K) and under the actual ambient light the room will have. Ivory shifts significantly under different light temperatures. A tile that reads correctly in the showroom can read flat or grey under cool-white office-style lighting.
7. Grout specification. Decide the grout tone before ordering. An ivory marble-look tile with the wrong grout colour is one of the most common post-installation regrets. Ivory or very light grey grout should nearly disappear against the tile. White grout creates a visible grid. 

Still comparing neutral shades? Read Ivory vs White vs Cream Tiles to understand how each color performs under different lighting conditions and which option best suits your interior style.

Ivory Tiles from Morbi, Gujarat: Tier Reference 2026

Note: All GVT products above are manufactured in Morbi, Gujarat, under IS 15622:2006. In coastal Indian cities with monsoon humidity of 85 to 95% from June to September, all ivory GVT at 0.05% absorption requires no sealing and maintains its colour without treatment across all seasons. The ceramic products in the budget tier are manufactured under IS 13712:2006 and are appropriate for wall use only unless a specific floor-rated PEI designation is confirmed in the TDS. 

Browse Ivory Tiles Across All Budgets on TilesFinders

From budget ivory ceramic bathroom wall tiles at Rs. 40 per sq.ft to premium 800x1600 mm Statuario marble-look GVT at Rs. 215 per sq.ft, the full ivory tile range from Morbi, Gujarat,t and Indian ceramic manufacturers is available on Tilesfinders. Filter by material, finish, size, and price tier to find the ivory tile that matches your room and your budget.