Top 10 Double Charge Tiles Manufacturers in India

Double charge tiles have a specific and well-earned place in the Indian tile market. They are the tile of choice for high-traffic indoor commercial floors: showroom entrances, hospital corridors, housing society lobbies, IT office floors, and retail spaces where thousands of people walk every day, and the floor still needs to look presentable months after a project handover.

What makes double charge tiles different from other vitrified tiles is not the raw material but the manufacturing process. Two layers of pigment are pressed into the tile body under high pressure before firing, which creates a surface colour that runs deeper into the tile than a single-charge or glazed vitrified tile. That extra depth is what gives double-charge tiles their scratch resistance advantage on polished surfaces.

This guide covers ten of India's most active double charge tile manufacturers in 2026, with notes on each company's production strengths, available sizes, and what type of buyer they are best suited for.

What Are Double Charge Tiles? A Technical Introduction

Standard vitrified tiles are produced by pressing a single layer of pigmented body material and then either glazing the surface or polishing it after firing. The colour depth of the tile's surface is typically 1 to 2 millimetres.

Double charge tiles are produced differently. Two separate pigment mixtures are fed into the pressing mould in sequence, creating a two-layer body that is then pressed together at very high pressure and fired at temperatures above 1200 degrees Celsius. The result is a tile whose surface colour runs 3 to 4 millimetres into the body, roughly twice the depth of a standard single-charge tile.

That extra colour depth gives double charge tiles their defining performance characteristic: the surface can be polished to a high shine without the polish wearing through the colour layer during the tile's service life in high-traffic areas. This is why double charge tiles are commonly specified in Indian commercial flooring applications where polished aesthetics and durability under foot traffic are both required.

Two points from this table deserve to be read carefully. First, double charge tiles are not suitable for wet areas or outdoor use. The polished surface becomes slippery in wet conditions, and the tile is not designed for exposure to outdoor weather. Second, design options are genuinely limited: double charge tiles are available in a smaller range of colours and patterns compared to GVT or PGVT tiles. This is an inherent characteristic of the two-press manufacturing process, not a shortcoming of individual manufacturers.

Top 10 Double Charge Tiles Manufacturers in India

The table below gives a quick reference across all ten manufacturers. Detailed profiles follow for each.

1. Kajaria Ceramics

Kajaria Ceramics is India's largest tile manufacturer by market share and produces double charge vitrified tiles across its Rajasthan and Andhra Pradesh plants. Their double charge range in the 2x2 (600x600 mm) and 800x800 mm sizes covers a curated selection of geometric and abstract polished patterns in cream, grey, and beige tones. Kajaria's nationwide dealer network of over 1,500 dealers ensures that double charge tiles from this manufacturer are accessible to buyers in virtually every Indian city and town.

For large housing society lobby projects, IT park common areas, and institutional corridor flooring across India, Kajaria's double charge range is one of the most consistently specified options. The brand's BIS IS 13630 certification, consistent batch quality, and accessible replacement availability make mid-project and post-handover tile replacement straightforward. Their 800x800 mm size is positioned in the premium commercial segment.

2. Somany Ceramics

Somany Ceramics is one of India's oldest tile companies and produces double charge vitrified tiles through its manufacturing facilities in Rajasthan and Gujarat. Their double charge range in 2x2 and 800x800 mm sizes covers standard neutral tones in polished finish with a range of geometric vein and abstract pattern options. Somany's double charge tiles are widely distributed across the mid-market commercial segment through their pan-India dealer network.

Contractors working on multi-wing housing society lobbies, commercial podium floors, and ground-floor retail spaces across Mumbai, Pune, and Hyderabad frequently specify Somany double charge tiles. The brand's consistent availability through tier-2 and tier-3 city dealers makes it a practical choice for projects outside major metros where stock access matters as much as tile aesthetics.

3. Varmora Granito

Varmora Granito, based in Morbi, is one of India's most recognised double charge specialists. The company produces double charge tiles in 2x2 (600x600 mm), 800x800 mm, and 2x4 (600x1200 mm) sizes, making it one of the few Morbi-based manufacturers with consistent 2x4 double charge production. Varmora's double charge range covers a wider pattern selection than most domestic producers, with both classic vein patterns and bolder abstract designs in a polished finish.

Varmora exports double charge tiles to the Middle East and Africa alongside its domestic distribution, which means the company's production lines are calibrated for consistent quality across large volume runs. For Indian commercial project buyers placing large bulk orders for showroom floors, hospital corridors, and airport terminal waiting areas, Varmora's volume capability and Morbi-competitive pricing are meaningful advantages. Their 800x800 mm double charge tiles are among the more widely available in that size from an Indian manufacturer.

4. Orient Bell

Orient Bell, the merged entity of Orient Tiles and Bell Ceramics, produces double-charged vitrified tiles from its manufacturing plants in Andhra Pradesh, Rajasthan, and Gujarat. The company's double charge range in 2x2 and 800x800 mm sizes is BIS IS 13630 certified, which makes Orient Bell one of the preferred sources for institutional and government project tile procurement, where BIS certification is a mandatory tender requirement.

Government office corridors, public hospital flooring, railway station concourses, and municipal building common areas across India regularly specify Orient Bell double charge tiles because of the brand's certification documentation and compliance track record. The company's long-standing institutional supply relationships across multiple Indian states give project procurement teams reliable reference points for quality and delivery performance.

5. Naveen Tiles

Naveen Tiles is a Morbi-based manufacturer with a focused production programme in double charge vitrified tiles across the 2x2 and 800x800 mm sizes. The company's production lines are oriented toward high-volume runs of popular double charge patterns in standard neutral tones, which keeps per-tile pricing competitive for commercial bulk buyers. Their consistent stock availability of common SKUs is a known advantage among Morbi-area dealers and distributors who supply commercial project orders.

For Indian contractors who are sourcing double charge tiles for multiple retail fit-outs, housing society lobby flooring across several towers, or a chain of commercial offices in a single city, Naveen's stock depth on standard patterns reduces the risk of batch discontinuation mid-project. The company distributes through established Morbi wholesale channels and can supply in full container quantities.

6. Asian Granito India

Asian Granito India, headquartered in Ahmedabad and listed on BSE, produces double charge vitrified tiles in 2x2, 800x800 mm, and 2x4 sizes across its manufacturing operations. The company's listed company quality control processes mean that size calibration, consistency and shade matching across batches are better documented than from smaller Morbi producers. Asian Granito's double charge range is positioned in the mid-to-premium commercial segment.

For commercial property developers working on IT campuses, business parks, and premium shopping mall common areas, Asian Granito's combination of double charge tiles with their full body and large format vitrified range under one company allows consolidated procurement. The company exports to over 50 countries, which means their production quality standards are calibrated for international buyer requirements alongside domestic supply.

7. Champion Tiles

Champion Tiles operates from Morbi and focuses its double charge production on the export market alongside domestic supply. The company produces double charge tiles in 2x2 and 800x800 mm sizes in polished finish across standard commercial colour palettes. Champion's export orientation to Southeast Asia and Africa means their packing standards, container loading procedures, and quality consistency documentation are well developed for large volume trade orders.

For Indian tile dealers who are sourcing double charge tiles for warehouse stocking rather than project-specific procurement, Champion's export-grade packing and volume pricing make them worth evaluating. The company's Morbi-based pricing is competitive on a per-square-foot basis for the 2x2 size when orders are placed at container or near-container volumes.

8. Nitco

Nitco is one of India's longest-running tile companies with a product mix that covers both imported stone and domestic vitrified tile production. Their double charge tiles in 2x2 and 800x800 mm sizes sit in the premium-residential and boutique-commercial segment, with a more curated pattern selection than the broad-volume Morbi producers. Nitco's double charge range is distributed through a dealer network concentrated in metro and large Tier-1 cities.

For residential developers finishing large bungalow drawing rooms, housing society entrance lobbies, and premium showroom floors in Mumbai, Delhi, and Bengaluru, where a more refined double charge aesthetic is needed alongside technical performance, Nitco's range is worth evaluating. Their design approach to double charge patterns is closer to the Italian large format aesthetic than the standard Morbi commercial output.

9. Euro Ceramics

Euro Ceramics, based in Wankaner, Gujarat, is a BSE-listed manufacturer that produces double charge vitrified tiles in 2x2 and 800x800 mm sizes for the mid-range commercial project market. The company's listed company status means quality documentation, BIS certification track record, and consistent batch production are well-maintained. Euro Ceramics supplies dealers across Gujarat, Maharashtra, Rajasthan, and parts of Madhya Pradesh through its regional distribution network.

For commercial project buyers who need a BSE-listed manufacturer's quality assurance at a price point below the top national brands, Euro Ceramics fills a practical gap in the double charge category. Their production is suited to mid-size commercial contracts: office building common areas, retail ground floors, and mid-range housing society lobbies rather than flagship projects.

10. Sunrock Ceramics

Sunrock Ceramics is a Morbi-based producer covering double charge vitrified tiles in 2x2 and 800x800 mm sizes across the mid-range commercial segment. The company distributes primarily through Morbi's established wholesale dealer network, which gives buyers across western and central India access to competitive double charge pricing without direct factory minimums. Sunrock's production covers standard commercial pattern ranges in polished finish.

For smaller contractors and regional tile dealers who need double charge tiles in mid-volume quantities without committing to a full container, Sunrock's availability through Morbi distributors is a practical advantage. The company's pricing sits in the accessible range for residential lobby and small commercial floor applications, where a double charge is specified for its scratch-resistant surface rather than for a design premium.

Double Charge vs Other Vitrified Tiles: Where Each Belongs

Double charge tiles are not the right tile for every project. Understanding where double charge fits in the vitrified tile family helps avoid specification mistakes that are costly to correct after installation.

Sizes, Finishes and Right Applications for Double Charge Tiles

2x2 size (600x600 mm): The most widely available double charge size in India. Stocked by virtually every manufacturer in this list. Best for housing society lobbies, office common areas, showroom floors, and any high-traffic indoor commercial floor. The 2x2 size offers the best balance of installation ease, pattern alignment, and cost in the double charge category.

800x800 mm size: A premium commercial size that gives a larger, more expansive floor visual in big open spaces such as airport terminals, large retail atria, and hotel lobbies. The 800x800 mm format requires a flatter substrate and more precise installation than the 2x2 size. Not every manufacturer in this list produces this size consistently; Kajaria, Varmora, Orient Bell, and Asian Granito are among the more reliable sources. Plan for a 12% to 15% buffer on quantity, given the higher per-piece value.

2x4 size (600x1200 mm): Available from select manufacturers, including Varmora and Asian Granito. The 2x4 double charge size suits modern corporate office floors and premium showrooms, where a rectangular slab format creates a different visual flow than the square 2x2. This size is produced in smaller volumes than 2x2, so confirm stock availability and lead time before specifying on a large project.

Finish: Polished only: Double charge tiles are produced exclusively in polished finish. The polished surface is what exposes the deeper colour layer that makes this tile category distinct. There is no matte or structured finish double charge tile. If a project needs a matte surface for anti-skid reasons on a high-traffic floor, GVT in matte or sugar finish is the correct specification, not double-charged.

Colour and pattern range: Double charge tiles are available in a limited colour palette compared to GVT or PGVT. Standard available tones include off-white, beige, light grey, dark grey, and some ivory variants. Patterns are primarily abstract veining, geometric grids, and flow patterns. The two-press manufacturing process limits the intricacy of achievable designs. If a project specification requires a specific wood-look, marble-with-gold-vein, or detailed surface pattern, GVT or PGVT is the right category.

Pricing Reference from Indian Double Charge Manufacturers

The prices below are approximate 2026 market rates from Indian manufacturers and distributors, before 18% GST. Final pricing depends on the manufacturer, dealer margin, order volume, and delivery location.

GST on tiles in India is 18% and applies on top of all base prices above. When comparing quotes from multiple manufacturers or dealers, always ask for the base price before GST separately to make an accurate comparison.

Common Mistakes When Specifying Double Charge Tiles

Using double charge on bathroom floors: This is the most common double charge specification error in Indian residential projects. The polished surface becomes slippery when wet and is a genuine safety hazard on bathroom floors. Double charge tiles are indoor dry-area commercial floor tiles. For bathroom floors, specify GVT in a matte or sugar finish. The rule holds regardless of how attractive the double charge pattern looks in a showroom sample.

Specifying double charge for balconies or outdoor areas: Balconies in Indian apartments face rain, humidity, and temperature variation. None of these conditions is compatible with double charge tiles. The polished surface, the tile body composition, and the manufacturing process are not designed for outdoor weather exposure. GVT in matte anti-skid finish is the correct specification for any outdoor or semi-outdoor area.

Expecting double charge to have the design range of GVT: Double charge tiles have a deliberately limited design palette. A buyer who approaches a double charge tile showroom expecting wood-look, marble-with-bold-veining, or geometric patterned collections comparable to GVT will be disappointed. The limited pattern range is a technical characteristic of the category, not a product gap. If design variety is the priority, GVT is the right starting point.

Confusing double charge with full body vitrified: Double charge tiles have a two-layer pigmented surface with deeper colour penetration than single-charge tiles, but the body below that surface layer is standard vitrified composition. Full body vitrified tiles have a consistent colour and composition running through the entire tile body from surface to base. These are different products with different technical strengths. Full-body tiles hold their appearance better on visible cut edges, which matters in staircase nosing and threshold applications.

Not ordering a 10% buffer: This applies to double-charge tiles as well as any tile category. Transit breakage, on-site cutting waste, and future replacement needs make a 10% quantity buffer standard practice. For the 800x800 mm size, a 12% to 15% buffer is more appropriate given the higher per-piece value and greater cutting waste at room edges.

Specifying 800x800 without confirming substrate flatness: The 800x800 mm double charge tile is a large format relative to the standard 2x2. Large tiles require a flatter and more precisely levelled concrete substrate for installation without lippage (height variation between adjacent tiles). A substrate that is acceptable for 2x2 tile installation may not be flat enough for 800x800 tiles. Confirm substrate flatness tolerance with the installation contractor before locking in the 800x800 specification.

Choosing the Right Double Charge Tile Manufacturer for Your Project

Double charge tiles fill a specific and valuable position in the Indian tile market: high-traffic indoor commercial floors where a polished surface aesthetic must hold up under daily use. The ten manufacturers in this list cover the full range from national listed-company quality with pan-India dealer reach to Morbi-based bulk pricing for large commercial contracts.

Match the manufacturer to your project's actual needs. For housing society lobbies and institutional floors, Kajaria, Somany, and Orient Bell give the most reliable supply and documentation. For large commercial bulk orders where pricing efficiency matters most, Varmora and Naveen Tiles from Morbi are the most practical starting points.

Browse verified double charge tile collections from Indian manufacturers, compare specifications, and connect with authorised dealers on TilesFinders, a B2B tiles marketplace built for Indian construction buyers and project teams.